diff --git a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
index 652464f..6013867 100644
--- a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
+++ b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * at91-sama7g5ek-u-boot.dtsi - Device Tree file for SAMA7G5 SoC u-boot
- * properties.
+ *  at91-sama7g5ek-u-boot.dtsi - Device Tree file for SAMA7G5 SoC u-boot
+ *  properties.
  *
- * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
  *
- * Author: Eugen Hristev <eugen.hristev@microchip.com>
- * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
  *
  */
 
@@ -15,12 +15,8 @@
 		u-boot,dm-pre-reloc;
 	};
 
-	ahb {
+	soc {
 		u-boot,dm-pre-reloc;
-
-		apb {
-			u-boot,dm-pre-reloc;
-		};
 	};
 };
 
@@ -32,18 +28,18 @@
 	u-boot,dm-pre-reloc;
 };
 
-&pioA {
+&pinctrl {
 	u-boot,dm-pre-reloc;
-
-	pinctrl {
-		u-boot,dm-pre-reloc;
-	};
 };
 
 &pinctrl_flx3_default {
 	u-boot,dm-pre-reloc;
 };
 
+&pioA {
+	u-boot,dm-pre-reloc;
+};
+
 &pit64b0 {
 	u-boot,dm-pre-reloc;
 };
@@ -60,7 +56,7 @@
 	u-boot,dm-pre-reloc;
 };
 
-&uart0 {
+&uart3 {
 	u-boot,dm-pre-reloc;
 };
 
diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts
index 38b3245..5313c6d 100644
--- a/arch/arm/dts/at91-sama7g5ek.dts
+++ b/arch/arm/dts/at91-sama7g5ek.dts
@@ -1,69 +1,150 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * at91-sama7g5ek.dts - Device Tree file for SAMA7G5 EK
- *		   SAMA7G5 Evaluation Kit
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
  *
- *  Copyright (c) 2020, Microchip Technology Inc.
- *                2020, Eugen Hristev <eugen.hristev@microchip.com>
- *		  2020, Claudiu Beznea <claudiu.beznea@microchip.com>
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
  */
 /dts-v1/;
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include "sama7g5.dtsi"
 #include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
-	model = "Microchip SAMA7G5 Evaluation Kit";
-	compatible = "microchip,sama7g5ek", "microchip,sama7g54", "microchip,sama7g5", "microchip,sama7";
-
-	aliases {
-		serial0 = &uart0;
-		i2c0 = &i2c1;
-		i2c1 = &i2c8;
-	};
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
 
 	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
 		stdout-path = "serial0:115200n8";
 	};
 
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
 	clocks {
-		slow_xtal: slow_xtal {
+		slow_xtal {
 			clock-frequency = <32768>;
 		};
 
-		main_xtal: main_xtal {
+		main_xtal {
 			clock-frequency = <24000000>;
 		};
 	};
 
-	ahb {
+	gpio_keys {
+		compatible = "gpio-keys";
 
-		apb {
-			sdmmc0: sdio-host@e1204000 {
-				bus-width = <8>;
-				non-removable;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_sdmmc0_cmd_data_default
-					     &pinctrl_sdmmc0_ck_rstn_ds_cd_default>;
-				status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
 			};
-
-			sdmmc1: sdio-host@e1208000 {
-				bus-width = <4>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_sdmmc1_cmd_data_default
-					     &pinctrl_sdmmc1_ck_cd_rstn_vddsel_default>;
-				status = "okay";
+			codec {
+				sound-dai = <&spdif_out>;
 			};
-
-			uart0: serial@e1824200 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_flx3_default>;
-				status = "okay";
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
 			};
 		};
 	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
 };
 
 &qspi0 {
@@ -81,18 +162,233 @@
 		spi-rx-bus-width = <8>;
 		m25p,fast-read;
 
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
 	};
 };
 
 &flx1 {
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
 };
 
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flx1_default>;
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
 };
 
 &flx8 {
@@ -121,18 +417,46 @@
 	};
 };
 
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
 &gmac0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gmac0_default
 		     &pinctrl_gmac0_mdio_default
-		     &pinctrl_gmac0_txc_default>;
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
 	phy-mode = "rgmii-id";
 	status = "okay";
 
 	ethernet-phy@7 {
 		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -140,19 +464,43 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_mdio_default>;
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
 	status = "okay";
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-&pinctrl {
-	pinctrl_flx1_default: flx1_default {
-		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
-			 <PIN_PC10__FLEXCOM1_IO1>;
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
 		bias-disable;
 	};
 
@@ -162,67 +510,16 @@
 		bias-pull-up;
 	};
 
-	pinctrl_i2c8_default: i2c8_default {
-		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
-			 <PIN_PC13__FLEXCOM8_IO1>;
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
 		bias-disable;
 	};
 
-	pinctrl_qspi: qspi {
-		pinmux = <PIN_PB12__QSPI0_IO0>,
-			 <PIN_PB11__QSPI0_IO1>,
-			 <PIN_PB10__QSPI0_IO2>,
-			 <PIN_PB9__QSPI0_IO3>,
-			 <PIN_PB16__QSPI0_IO4>,
-			 <PIN_PB17__QSPI0_IO5>,
-			 <PIN_PB18__QSPI0_IO6>,
-			 <PIN_PB19__QSPI0_IO7>,
-			 <PIN_PB13__QSPI0_CS>,
-			 <PIN_PB14__QSPI0_SCK>,
-			 <PIN_PB15__QSPI0_SCKN>,
-			 <PIN_PB20__QSPI0_DQS>,
-			 <PIN_PB21__QSPI0_INT>;
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
 		bias-disable;
-		slew-rate = <0>;
-		atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
-	};
-
-	pinctrl_sdmmc0_cmd_data_default: sdmmc0_cmd_data_default {
-		pinmux = <PIN_PA1__SDMMC0_CMD>,
-			 <PIN_PA3__SDMMC0_DAT0>,
-			 <PIN_PA4__SDMMC0_DAT1>,
-			 <PIN_PA5__SDMMC0_DAT2>,
-			 <PIN_PA6__SDMMC0_DAT3>,
-			 <PIN_PA7__SDMMC0_DAT4>,
-			 <PIN_PA8__SDMMC0_DAT5>,
-			 <PIN_PA9__SDMMC0_DAT6>,
-			 <PIN_PA10__SDMMC0_DAT7>;
-		bias-pull-up;
-	};
-
-	pinctrl_sdmmc0_ck_rstn_ds_cd_default: sdmmc0_ck_rstn_ds_cd_default {
-		pinmux = <PIN_PA0__SDMMC0_CK>,
-			 <PIN_PA2__SDMMC0_RSTN>,
-			 <PIN_PA11__SDMMC0_DS>,
-			 <PIN_PA14__SDMMC0_CD>;
-		bias-pull-up;
-	};
-
-	pinctrl_sdmmc1_cmd_data_default: sdmmc1_cmd_data_default {
-		pinmux = <PIN_PB29__SDMMC1_CMD>,
-			 <PIN_PB31__SDMMC1_DAT0>,
-			 <PIN_PC0__SDMMC1_DAT1>,
-			 <PIN_PC1__SDMMC1_DAT2>,
-			 <PIN_PC2__SDMMC1_DAT3>;
-		bias-pull-up;
-	};
-
-	pinctrl_sdmmc1_ck_cd_rstn_vddsel_default: sdmmc1_ck_cd_rstn_vddsel_default {
-		pinmux = <PIN_PB30__SDMMC1_CK>,
-			 <PIN_PB28__SDMMC1_RSTN>,
-			 <PIN_PC5__SDMMC1_1V8SEL>,
-			 <PIN_PC4__SDMMC1_CD>;
-		bias-pull-up;
 	};
 
 	pinctrl_gmac0_default: gmac0_default {
@@ -248,12 +545,17 @@
 		bias-disable;
 	};
 
-	pinctrl_gmac0_txc_default: gmac0_txc_default {
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
 		pinmux = <PIN_PA24__G0_TXCK>;
 		slew-rate = <0>;
 		bias-pull-up;
 	};
 
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
 	pinctrl_gmac1_default: gmac1_default {
 		pinmux = <PIN_PD30__G1_TXCK>,
 			 <PIN_PD22__G1_TX0>,
@@ -272,4 +574,231 @@
 			 <PIN_PD29__G1_MDIO>;
 		bias-disable;
 	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		pinmux = <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>,
+			 <PIN_PA7__SDMMC0_DAT4>,
+			 <PIN_PA8__SDMMC0_DAT5>,
+			 <PIN_PA9__SDMMC0_DAT6>,
+			 <PIN_PA10__SDMMC0_DAT7>,
+			 <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA14__SDMMC0_CD>,
+			 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB28__SDMMC1_RSTN>,
+			 <PIN_PC5__SDMMC1_1V8SEL>,
+			 <PIN_PC4__SDMMC1_CD>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		pinmux = <PIN_PD3__SDMMC2_CMD>,
+			 <PIN_PD5__SDMMC2_DAT0>,
+			 <PIN_PD6__SDMMC2_DAT1>,
+			 <PIN_PD7__SDMMC2_DAT2>,
+			 <PIN_PD8__SDMMC2_DAT3>,
+			 <PIN_PD4__SDMMC2_CK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
 };
diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
index 2505a2f..b7c261e 100644
--- a/arch/arm/dts/sama7g5.dtsi
+++ b/arch/arm/dts/sama7g5.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * sama7g5.dtsi - Device Tree Include file for SAMA7G5 SoC.
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
  *
- * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
  *
- * Author: Eugen Hristev <eugen.hristev@microchip.com>
- * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
  *
  */
 
@@ -14,12 +14,63 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clk/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Microchip SAMA7G5 family SoC";
 	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>;
+			clock-names = "cpu", "master", "xtal";
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
 	clocks {
 		slow_rc_osc: slow_rc_osc {
 			compatible = "fixed-clock";
@@ -42,205 +93,794 @@
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
-	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		A7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>;
-			clock-names = "cpu", "master", "xtal";
+		usb_clk: usb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
 		};
 	};
 
-	ahb {
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		ranges;
 
-		apb {
-			compatible = "simple-bus";
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
 
-			pioA: pinctrl@e0014000 {
-				compatible = "microchip,sama7g5-gpio";
-				reg = <0xe0014000 0x800>;
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE 13>; /* PMC_MCK1 */
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: securam@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pinctrl: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-gpio";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+
+			pioA: pinctrl_default {
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "okay";
-
-				pinctrl: pinctrl_default {
-					compatible = "microchip,sama7g5-pinctrl";
-				};
+				compatible = "microchip,sama7g5-pinctrl";
 			};
+		};
 
-			pmc: pmc@e0018000 {
-				compatible = "microchip,sama7g5-pmc";
-				reg = <0xe0018000 0x200>;
-				#clock-cells = <2>;
-				clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
-				clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
-				status = "okay";
+		pmc: pmc@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>, <&main_rc>;
+			clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
+		};
+
+		shdwc: shdwc@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtt@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_rc_osc>, <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
 			};
+		};
 
-			clk32: sckc@e001d050 {
-				compatible = "microchip,sam9x60-sckc";
-				reg = <0xe001d050 0x4>;
-				clocks = <&slow_rc_osc>, <&slow_xtal>;
-				#clock-cells = <1>;
-			};
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 78>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			qspi0: spi@e080c000 {
-				compatible = "microchip,sama7g5-ospi";
-				reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
-				reg-names = "qspi_base", "qspi_mmap";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
-				clock-names = "pclk", "gclk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 78>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 78>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			qspi1: spi@e0810000 {
-				compatible = "microchip,sama7g5-qspi";
-				reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
-				reg-names = "qspi_base", "qspi_mmap";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
-				clock-names = "pclk", "gclk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 78>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-			sdmmc0: sdio-host@e1204000 {
-				compatible = "microchip,sama7g5-sdhci";
-				reg = <0xe1204000 0x300>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
-				clock-names = "hclock", "multclk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
-				assigned-clock-rates = <200000000>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
-				status = "disabled";
-			};
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-			sdmmc1: sdio-host@e1208000 {
-				compatible = "microchip,sama7g5-sdhci";
-				reg = <0xe1208000 0x300>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
-				clock-names = "hclock", "multclk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
-				assigned-clock-rates = <200000000>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
-				status = "disabled";
-			};
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-			pit64b0: timer@e1800000 {
-				compatible = "microchip,sama7g5-pit64b";
-				reg = <0xe1800000 0x4000>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
-				clock-names = "pclk", "gclk";
-				status = "okay";
-			};
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-			flx1: flexcom@e181c000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xe181c000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xe181c000 0x800>;
-				status = "disabled";
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-				i2c1: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
-				};
-			};
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
 
-			uart0: serial@e1824200 {
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
-				reg = <0xe1824200 0x200>;
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+					<&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "disabled";
 			};
+		};
 
-			gmac0: ethernet@e2800000 {
-				compatible = "cdns,sama7g5-gem";
-				reg = <0xe2800000 0x4000>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>;
-				clock-names = "hclk", "pclk", "tx_clk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE 21>; /* eth pll div. */
-				assigned-clock-rates = <125000000>;
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
+		};
 
-			gmac1: ethernet@e2804000 {
-				compatible = "cdns,sama7g5-emac";
-				reg = <0xe2804000 0x1000>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
-				clock-names = "pclk", "hclk";
+		flx7: flexcom@e2024000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
+		};
 
-			dma0: dma-controller@e2808000 {
-				compatible = "microchip,sama7g5-dma";
-				reg = <0xe2808000 0x1000>;
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				#dma-cells = <1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-				clock-names = "dma_clk";
-				status = "disabled";
-			};
+		gmac0: ethernet@e2800000 {
+			compatible = "cdns,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE 21>; /* eth pll div. */
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
 
-			flx8: flexcom@e2818000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xe2818000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+		gmac1: ethernet@e2804000 {
+			compatible = "cdns,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xe2818000 0x800>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
+					<&dma0 AT91_XDMAC_DT_PERID(22)>;
+				dma-names = "rx", "tx";
 				status = "disabled";
-
-				i2c8: i2c@600 {
-					compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
-					atmel,fifo-size = <32>;
-					dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
-						<&dma0 AT91_XDMAC_DT_PERID(22)>;
-					dma-names = "rx", "tx";
-					atmel,use-dma-rx;
-					atmel,use-dma-tx;
-					status = "disabled";
-				};
 			};
+		};
 
-			gic: interrupt-controller@e8c11000 {
-				compatible = "arm,cortex-a7-gic";
-				#interrupt-cells = <3>;
-				#address-cells = <0>;
-				interrupt-controller;
-				interrupt-parent;
-				reg = <0xe8c11000 0x1000>,
-					<0xe8c12000 0x2000>;
+		flx9: flexcom@e281c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
+					<&dma0 AT91_XDMAC_DT_PERID(24)>;
+				dma-names = "rx", "tx";
+				status = "disabled";
 			};
 		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupt-parent;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
 	};
 };